The back of a 2024+ Polaris RZR XP 1000 is mostly plastic and taillights, and it doesn't take much to crack them, whether you back into a rock or your buddy follows too close. This Rear Bumper wraps the rear end in 1.5" steel tubing that mounts directly to the frame, and you can add a 2" receiver hitch rated for 1,500 lb of towing.
Highlights
- 1.5" x 0.078" wall heavy-duty steel tubing
- Protects taillights and rear plastics
- Robust brackets mount directly to the frame
- Optional 2" receiver hitch in Black or Red, with hitch pin and cotter pin
- 1,500 lb maximum towing capacity with the receiver
- Doesn't block the third brake light or backup camera
- Cutout for access to the differential oil plug
- UV-resistant powder coat finish
Choose Your Setup
| Option | What you get |
|---|---|
| No Receiver Hitch | Bumper only, base price |
| Black receiver | Bumper with a 2" receiver hitch in Black (adds to price) |
| Red receiver | Bumper with a 2" receiver hitch in Red (adds to price) |
The receiver accepts standard 2" attachments, so you can pull a small trailer, run a hitch-mounted carrier or use a recovery point.
Frame-Mounted Strength
Because it bolts to the frame rather than the plastics, the bumper takes hard hits without getting knocked loose, and the impact goes into the chassis instead of the bodywork. Heavy-duty 3/16" steel is used in the build for added strength.
Thoughtful Details
The design leaves the third brake light and backup camera clear, and a cutout lets you reach the differential oil plug without removing the bumper. The curves follow the RZR's rear contours for an aggressive, factory-matched look.
What's in the Box
- Rear bumper
- 2" receiver hitch with hitch pin and cotter pin, if selected
Who It's For and What Pairs Well
For 2024+ RZR XP and XP 4 owners who want rear-end protection or a place to hitch up. Pair it with a front bumper from 2024+ RZR XP bumpers and a winch from RZR XP 1000 2024+ winches and recovery gear.
Fitment
| Year | Make | Model |
|---|---|---|
| 2024+ | Polaris | RZR XP |
| 2024+ | Polaris | RZR XP 4 |
Installation Notes
The bumper bolts to the frame using the brackets provided; follow the instructions linked below. Don't exceed the 1,500 lb towing limit, and check the hardware after the first few rides.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-rear-bumper
- fitment_raw:
- Polaris RZR XP 2024+; Polaris RZR XP 4 2024+
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/10751/product/94473/
- desc_status:
- rewritten_2026-10-27
