Backing into a tree, sliding into a rock or taking a tap from a riding buddy can crack the rear plastics and taillights on a 2026+ Polaris RZR XP S. This rear bumper puts a wall of 1.5" steel tubing behind them, mounted straight to the frame, and it gives the machine a bold look that nobody will mistake for stock.
Highlights
- 1.5" x 0.078" wall heavy-duty steel tubing
- Protects rear bodywork and taillights
- Robust brackets mount directly to the frame
- Bends follow the lines of the machine
- UV-resistant powder coat resists chips, corrosion and fading
- Does not block the third brake light or backup camera
- Optional 2" receiver hitch in black or red
Strength Where You Need It
Factory rear plastics aren't built to take hits. This bumper is. The steel tubing handles impacts that would crack bodywork, and the frame mounts keep it solid on rough trails.
Style That Matches the Machine
The curves follow the natural lines of the RZR XP S for an aggressive look, and the powder-coated finish stays sharp after seasons in the sun and mud.
Add the Receiver Hitch
Choose a hitch color in the picker, or "No Receiver Hitch" for the bumper alone. The hitch is 3/16" heavy-duty steel with a standard 2" receiver that fits standard 2" attachments, rated for up to 1,500 lb of towing. It includes a hitch pin and cotter pin and has a cutout for access to the differential oil plug.
Bumper Only or Bumper With Hitch?
- Bumper only: the lowest-cost way to protect rear plastics and taillights
- Bumper with hitch: adds towing and a solid recovery point in one install, with the hitch color-matched in black or red
Care Tips
Rinse mud out of the bumper's brackets after wet rides and touch up any deep chips in the powder coat so rust can't get started.
What's in the Box
- Rear bumper with mounting brackets and hardware
- 2" receiver hitch with hitch pin and cotter pin, if selected
Who It's For and What Pairs Well
For RZR XP S and XP S 4 owners who want rear protection, with or without towing. If you only need a hitch, see the stand-alone rear receiver hitch, and protect the frame for bigger builds with a frame stiffener.
Fitment
| Year | Make | Model |
|---|---|---|
| 2026+ | Polaris | RZR XP S |
| 2026+ | Polaris | RZR XP S 4 |
Installation Notes
The bumper bolts to the frame with the included brackets. Never exceed the 1,500 lb towing rating. Instructions are linked below.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-s-rear-bumper
- fitment_raw:
- Polaris RZR XP S 2026+; Polaris RZR XP S 4 2026+
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/10751/product/160738/
- desc_status:
- rewritten_2026-10-28
