The factory sway bar links on a Polaris RZR XP 1000 are thin and fixed-length, which means they flex under load and you can't tune them. These heavy-duty links are machined from 6061 billet hex aluminum, run self-lubricating 5/8" heims, and give you more than 2" of adjustment, so you get an instant handling improvement and the ability to fine-tune the suspension for ideal weight distribution. They fit the XP 1000 and XP 4 1000.
Highlights
- Made of hardened 6061 hex aluminum alloy
- Over 2" of adjustability
- Over twice as thick as stock
- Fully adjustable, self-lubricating 5/8" heim joints
- Easy bolt-on installation
Instant Handling Improvement
A sway bar only works as well as the links that connect it to the suspension. Stiffer links transfer the bar's load without flexing, so the RZR stays flatter through corners. With over 2" of adjustment, you can also set the bar's preload and level the links after a lift or ride-height change, which helps you dial in weight distribution.
Strength and Durability
These links are built with the structural integrity to give you confidence blasting the whoops or charging up the most heart-thumping hills. The billet hex bodies are over twice as thick as stock, and the self-lubricating heims keep moving smoothly without constant maintenance.
What's in the Box
- Pair of adjustable billet hex sway bar links with 5/8" heims
- Installation instructions
Who It's For and What Pairs Well
These links are for RZR owners who corner hard, run bigger tires, or have changed ride height and need adjustable links. They are not compatible with the High Clearance boxed rear trailing arms (RTA-P-RZRXPT-HC). For a softer, more compliant rear, look at the sway bar shock in RZR XP 1000 sway bars (4-seat: RZR XP 4 1000 sway bars). Fresh bushings and ball joints from RZR XP 1000 suspension parts round out a handling refresh.
Fitment
| Year | Make | Model |
|---|---|---|
| 2014-2023 | Polaris | RZR XP 1000 |
| 2014-2023 | Polaris | RZR XP 4 1000 |
Note: NOT compatible with High Clearance Trailing Arm (RTA-P-RZRXPT-HC)
Installation
The links bolt on in place of the stock links. Set both links to the same length before final tightening. Instructions are below.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-1000-heavy-duty-sway-bar-links
- fitment_raw:
- Polaris RZR XP 1000 2014-2023; Polaris RZR XP 4 1000 2014-2023
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/438/product/4936/
- desc_status:
- rewritten_2026-10-22
