If the steering wheel on your Polaris RZR XP Turbo S jerks every time a front tire hits a rock or rut, you're feeling steering feedback. The EZ-STEER 400 Watt Power Steering Kit takes it away. It reduces steering effort and cancels feedback, so even the bumpiest trail won't yank the wheel out of your hands.
Highlights
- 400-watt electric power steering motor
- Reduces steering effort
- Eliminates steering feedback
- Compact control box for easier mounting
- Sealed input and output shafts
- Watertight control box and connectors
- No soldering required
- 3-year manufacturer warranty
Calmer Steering on Rough Trails
Feedback is what makes the wheel kick in your hands when a tire hits something. EZ-STEER senses it and counters it, so you keep control and your hands and wrists don't take the beating. Less effort also means less fatigue at the end of a long day.
Sealed Against Water and Dust
Water and dust ruin a lot of power steering kits. EZ-STEER seals the input and output shafts and uses a watertight control box and connectors, so mud, creek crossings and washdowns don't get inside.
EZ to Install
The plug-in wiring needs no soldering, and the compact control box is easy to find a home for. You'll be back on the trail quickly.
400 or 600 Watts?
The 400-watt kit is a good fit for stock or mildly upgraded machines. If you run very large tires, a big lift or portals, the 600-watt Series 6 kit has more assist and still runs on a single battery.
Fitment Notes
- Not compatible with machines equipped with Dynamix
What's in the Box
- 400-watt motor
- ECU module
- Wiring harness
- Steering shaft
- Mounting brackets
- All hardware and instructions
Who It's For and What Pairs Well
For trail riders who want lighter, calmer steering. Pair it with a RackBoss 2.0 rack and tie rods from RZR Turbo S steering parts for a complete steering upgrade.
Fitment
| Year | Make | Model |
|---|---|---|
| 2018-2021 | Polaris | RZR XP Turbo S |
| 2019-2021 | Polaris | RZR XP 4 Turbo S |
Note: Not compatible with machines equipped with Dynamix
Installation Notes
Remove the steering shaft, install the motor and new shaft, mount the control box, and plug in the harness. No soldering is needed. Center the steering before final tightening.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-turbo-s-power-steering-kit
- fitment_raw:
- Polaris RZR XP Turbo S 2018-2021; Polaris RZR XP 4 Turbo S 2019-2021
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/9644/product/90518/
- desc_status:
- rewritten_2026-10-26
