Trail damage usually hits one corner, not all four. This is the driver (left) rear fender from the DRT Motorsports 20205FD01101 fender kit for the Polaris Xpedition ADV / ADV 5 2024+, sold on its own so you can replace a damaged or worn panel without buying the complete set. It is the same laser-cut, formed and welded 5052 aluminum in semi-gloss black powder coat panel that comes in the kit.
Features and Benefits
- Single panel: the driver rear fender only.
- Same as the kit: matches the other panels of the 20205FD01101 kit.
- Material: laser-cut, formed and welded 5052 aluminum in semi-gloss black powder coat.
- Saves money: replace one piece instead of four.
Specifications, Materials and Finish
- Position: Driver Rear (driver (left) rear)
- Material: 5052 aluminum
- From kit: DRT 20205FD01101
- DRT part number: 20205FD01101-LR
Fitment
| Year | Make | Model |
|---|---|---|
| 2024+ | Polaris | Xpedition ADV / ADV 5 |
Fitment note: Replacement panel for the DRT 20205FD01101 kit. Confirm which position you need before ordering. Mounting hardware is included.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Driver Rear fender panel with mounting hardware
Who It's For and What Pairs Well
For owners of the DRT Polaris Xpedition ADV 5 2024+ Aluminum Fender Kit who have damaged one panel. Before ordering, look at the panel you are replacing and confirm its side and position, since the driver and passenger panels are mirror images and front and rear panels are different shapes.
Installation Notes
Remove the damaged panel and keep its hardware unless it is worn or bent. Install the new panel in the same mounting locations as the original kit panel and tighten evenly so the panel sits flush against the body. Care: rinse mud and road salt off after rides and wash with mild soap. Touch up chips in the powder coat promptly so bare metal does not corrode, and check the mounting points after any hard hit.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/aluminum-fender-left-rear-for-polaris-2024-xpedition-adv-5
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 330.0; comp r1industriesoffroad.com 330.0
