null

FREE SHIPPING ON MOST ORDERS OVER $199!

phone: 430-258-6189

Polaris Xpedition XP / XP 5 2024+ Bed Rack & Tire Carrier System - DRT Motorsports

$380.00 - $1,000.00
SKU:
20205TC01101-KIT
Shipping:
  • Fast Shipping

  • Free Exchanges

  • Safe Payments

  • Top Notch Tech Support

On an Xpedition XP or XP 5 overland trip, the bed has to carry the spare, the cooler and the gear, and still hold your lights. DRT's system does both jobs. The tire carrier holds a spare above the bed with a closed-off lower area and room underneath for most 12V coolers. The bed rack adds light mounts facing forward, sideways, rearward or over the bed. Both clamp to the Xpedition's extruded aluminum bed rails without affecting the tilt bed. Buy the complete kit or either piece alone.

Features and Benefits

  • Three ways to buy: complete kit (20205TC01101), tire carrier only (20205TC02101) or bed rack only (20205TC03101).
  • Spare up top, cooler below: the space under the carrier fits most 12V electric coolers.
  • Secure lower bed: the lower bed area is closed off so items do not fall out.
  • Light mounting anywhere: the bed rack mounts lights forward, side, rear or over the bed.
  • Tilt bed still works: mounts to the extruded aluminum bed rails.
  • Custom contrast: clear anodized aluminum mesh plates on the rack.

Specifications, Materials and Finish

  • Construction: laser-cut, formed and welded steel
  • Finish: premium powder coat; clear anodized aluminum mesh plates
  • Clearance: 20" from rack bottom to bed floor in the flat center, tapering to 18 3/8" at the sides
  • Mounting: Xpedition extruded aluminum bed rails
  • Install: bolt-on
  • DRT part numbers: 20205TC01101 kit, 20205TC02101 carrier, 20205TC03101 rack (patent pending)

Fitment

YearMakeModel
2024+PolarisXpedition XP (2-door)
2024+PolarisXpedition XP 5 (4-door)

Fitment note: DRT lists XP and XP 5 models. For Xpedition ADV / ADV 5, see the DRT Polaris Xpedition ADV / ADV 5 2024+ Exterior Tire Carrier or DRT Polaris Xpedition ADV / ADV 5 2024-2026 Interior Tire Carrier & Rack System.

TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.

What's in the Box

  • Kit: tire carrier and bed rack with hardware
  • Carrier only: tire carrier with hardware
  • Rack only: bed rack with hardware
  • Lights and tire strap not included

Who It's For and What Pairs Well

For Xpedition XP owners building an overland rig. Secure the spare with the DRT Ratcheting 3-Point Y-Strap (P/N 10005TC01401). Pair it with the DRT Polaris Xpedition 2024-2026 Front Bumper (OEM Winch Compatible) and DRT Polaris Xpedition 2024-2026 A-Pillar Light Bracket Kit.

Installation Notes

Both pieces bolt to the extruded aluminum bed rails. Install the carrier first if you bought the kit, then add the rack. Check that the tilt bed still lifts freely before loading. Measure your cooler against the 20" center clearance. Choosing a package: the complete kit is the best value if you want both spare storage and light mounting. Pick the tire carrier alone if you already have lights on the cage and just need the spare off the bed floor. Pick the bed rack alone if you carry the spare elsewhere but want chase, work or side lights over the bed. Both pieces share the same bed-rail mounting, so you can start with one and add the other later. Clear anodized mesh plates on the rack can be swapped to a colored finish to tie the rack into the rest of your build. Keep heavy items low in the closed-off lower bed area and lighter gear on top of the spare. Before ordering, measure your spare: the overall diameter must be within the carrier's stated capacity, and a mounted spare adds real weight up high, so check strap tension and hardware torque after the first ride and at every service. Wire any rack-mounted lights through a fused relay and route the harness along the bed rail so the tilt bed can still lift without pulling on the wiring.

Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.

Manufacturer:
DRT Motorsports
source:
drt_site
drt_url:
https://drtmotorsports.com/products/option-set-1022318-dropdown-2
desc_status:
written_2026-10-31
price_basis:
DRT retail 1000.0; comp r1industriesoffroad.com 1000.0
What Our Customers Are Saying
★★★★★

Fits flush all the way around, no gap at the top edge like the last aftermarket one I tried

Jace C.Yamaha Wolverine Full Windshield
★★★★★

Full enclosure held up through a week of rain camping, no leaks anywhere, seams are sealed well

Kyle C.Honda Talon Full Cab Enclosure
★★★★☆

Does the job well, just wish the mounting instructions had better diagrams

Grant C.Yamaha Viking Snow Plow Kit
★★★★★

Optically clear, zero waviness looking through it even at highway speeds. Seals up tight, no whistling

Corey N.Yamaha Wolverine Full Windshield
★★★★★

These doors are night and day compared to stock plastic. My kids stopped complaining about mud getting in

Zach G.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★★☆

Cuts dust down a good bit, still get some coming through around the back window seam on real dusty days

Dean J.Polaris Ranger Cab Enclosure
★★★☆☆

Works but the fan is louder than I'd like on the high setting

Heath J.CF Moto Cab Heater Kit
★★★★★

Install video on youtube made this a 45 min job. Fit is tight, no wind noise at highway speed either

Travis K.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★☆☆

Took longer to figure out the install than I expected, directions could be better but it works

Derek S.Polaris Ranger Cab Enclosure
★★★★★

This is the AJK bumper Trailworx pointed me to when the EMP one I wanted was backordered, glad they did, quality is great

Adam T.AJK Offroad Kawasaki Ridge Rear Bumper
★★★★★

Easy clamp-on install, no tools needed, and they fold in nice when trailering

Blake C.Can-Am Commander Side Mirrors
★★★★★

Ordered this after my stock bumper got wrecked, fit was spot on and paint matches close enough you can't tell

Kevin B.CF Moto Uforce 1000 Rear Bumper