Worn A-arm bushings on a CFMOTO UFORCE U10 Pro show up as clunking, sloppy steering, and uneven tire wear. Factory bushings wear out faster than you'd think, especially if you ride in mud, sand, or water. This A-Arm Bushing Kit replaces them with UHMW bushings and steel sleeves that last much longer than stock, and it comes with a press tool so you can do the job yourself.
Features and Benefits
Self-Lubricating UHMW
The bushings are made from UHMW (Ultra-High Molecular Weight) polyethylene. UHMW is self-lubricating, so it stays smooth without constant greasing and actually gets smoother the more you use it. The result is a tighter, smoother-feeling suspension that can make your U10 Pro feel like a new machine.
Lasts Longer Than OEM
UHMW has low-wear characteristics, which means more miles before you have to do this job again. Some owners swap early before any problems start. Others install them when the factory bushings are already shot. Either way, you're putting in a part built to outlast stock.
CNC-Machined Fit
Each bushing is CNC machined for an exact fit in your A-arms, so there's no slop and no forcing parts that don't line up.
Complete Kit with Press Tool
This is a complete inner bushing kit for either the front or rear A-arms. You get all the bushings and steel sleeves for one set of arms, plus a press tool that makes installation a lot easier than hammering or using sockets as drivers.
Fitment
| Year | Make | Model |
|---|---|---|
| 2025+ | CFMOTO | UFORCE U10 Pro |
| 2025+ | CFMOTO | UFORCE U10 Pro Highland |
| 2025+ | CFMOTO | UFORCE U10 Pro XL |
| 2025+ | CFMOTO | UFORCE U10 Pro XL Highland |
One kit covers the inner bushings for either the front or the rear A-arms. Order two kits to do both ends.
What's in the Box
- (8) Short bushings
- (4) Long bushings
- (4) Short steel sleeves
- (2) Long steel sleeves
- Press tool
Who It's For and What Pairs Well
This kit is for any U10 Pro owner with clunks or play in the suspension, anyone doing preventive maintenance, and anyone installing new A-arms who needs bushings. It works in the stock arms and in aftermarket arms like the Atlas Pro forward offset A-arms and Atlas Pro rear offset A-arms. If you're already under the machine doing suspension work, the steel bar tie rod kit is another wear item worth upgrading. More upkeep parts are in our U10 Pro maintenance section.
Install Notes
You'll need to remove the A-arms to swap the bushings. Push out the old bushings, then use the included press tool to seat the new UHMW bushings and steel sleeves. With basic hand tools and a jack or lift, it's a reasonable home garage job.
Notes
Warning: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
California Proposition 65 Warning: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
