The Wolverine RMAX comes from Yamaha with a winch mount built into the front end, but it only takes a wide-spool winch. This kit is set up for exactly that: the Viper MA11838 conversion kit with its hawse fairlead plus the Viper V3 6,000 lb wide spool winch with 60 ft of synthetic rope. Everything you need to put a Viper on the factory mount arrives in one order.
Built for the RMAX
- MA11838 conversion kit for the 2021-2026 Wolverine RMAX factory winch mount, per Moto Alliance.
- V3 6,000 lb wide spool matches the RMAX's 3 x 6.67 in. wide 4-hole pattern.
- Hawse fairlead included with the conversion kit.
- Black industrial finish on the conversion kit, with hardware and instructions in the box.
- 60 ft of 1/4 in. synthetic rope reaches far-off anchors on open trails.
RMAX Trail Notes
- A loaded RMAX4 with four riders and a cooler is heavy. The 6,000 lb wide spool has the margin for that.
- The extra rope length lets you reach a solid anchor instead of a weak sapling.
- Keep the remote paired and charged before long rides.
- Dust from dry trails builds up in the fairlead. Blow it out after dusty days so the rope slides cleanly.
Before the First RMAX Recovery
- Spool the full 60 ft out and back in under light load to seat the rope.
- Pick an anchor that is straight ahead of the RMAX when you can, to keep side load off the fairlead.
- Shift to neutral and let the winch do the work, adding gentle throttle only if the tires need help.
- Never step over a loaded rope, and keep riders back from the line.
Viper V3 Winch Specifications
- Motor: 12V DC sealed permanent magnet
- Gear train: 3-stage planetary metal gears
- Brake: automatic, 100% load holding
- Clutch: sliding ring gear
- Wiring: 6 gauge; tie rods, fairlead hardware and motor terminals are stainless steel
- Sealing: IP67 waterproof rating per Moto Alliance; corrosion-resistant aluminum housing
- Wireless remote with its own frequency, plus a rocker handlebar switch and dash switch
- Manufacturer warranty: limited one year on the winch, 6 months on the rope
- V3 6,000 wide spool: 60 ft x 1/4 in. synthetic rope, 3.0 x 6.6 in. bolt pattern, 15 x 4.75 x 4.6 in., 18 lb
Fitment
| Year | Make | Model |
|---|---|---|
| 2021-2026 | Yamaha | Wolverine RMAX (RMAX2 / RMAX4), listed by Moto Alliance as RMX |
Note: Moto Alliance says the RMAX has a factory integrated winch mount and accepts only wide-spool winches with the 3 x 6.67 in. 4-hole pattern, so this kit comes with the V3 6,000 lb wide spool winch only.
What's in the Box
- Viper MA11838 RMAX conversion kit with hawse fairlead, mounting hardware and instructions
- Viper V3 6,000 lb wide spool winch in your choice of rope color
- 60 ft x 1/4 in. synthetic rope and clevis hook
- Wireless remote, rocker handlebar switch and dash switch
- Contactor and wiring, hand saver strap, and installation hardware
Who It's For and What Pairs Well
This kit is for RMAX owners who head out on long trail days and want reliable self-recovery. Add a Denali blade from Wolverine RMAX snow plows and see more in RMAX recovery gear and winches.
Installation Notes
The MA11838 conversion kit and V3 bolt to the RMAX factory winch mount with the included hardware. Moto Alliance did not post a separate PDF for this conversion kit, so follow the instructions packed with the kit and with the V3 winch. Route the power leads to the battery away from hot engine parts and keep them clear of the steering.
- source:
- motoalliance
- ma_url:
- https://www.motoalliance.com/viper-utv-winch-mount-yamaha-wolverine-rmx
- desc_status:
- written_2026-10-31
- ma_parts:
- MA11838 $69.99 + V3 6000 wide $459.99
