Polaris RZR XP 1000 & XP 4 1000 (2024+) Custom Cage Windshield Kit, Trim-to-Fit 45" x 33" Polycarbonate, BreezeRite Vents, XR Optic Hard Coat

Swap the factory cage on a 2024+ Polaris RZR XP 1000 for a custom or aftermarket cage and you'll quickly find that off-the-shelf windshields no longer fit. This Custom Cage Windshield Kit solves that. The oversized 45-inch tall by 33-inch wide panel matches the width of the cage and the curve of the RZR XP hood, and you trim the height to suit your cage, then clamp it on.

Highlights

• Oversized 45" (H) x 33" (W) panel you cut to the height of your cage
• Follows the contours of the 2024+ RZR XP hood
• Preinstalled BreezeRite vents with three positions
• 1/4" polycarbonate, about 250x stronger than glass and 25x stronger than acrylic
• XR Optic hard coating for scratch resistance and lasting clarity
• Clamps and all hardware included
• 1-year manufacturer warranty

Made for Builds That Aren't Stock

Custom cages vary in tube size, height and pillar angle, which makes a perfect pre-cut windshield almost impossible. Starting with a panel that's already shaped to the hood and sized to the cage width, then trimming only the height, gets you a professional-looking fit without a custom fabrication shop.

Vents for Comfort

The BreezeRite vents come preinstalled. Keep them closed in cold or dusty conditions, open them halfway for a light breeze, or open them fully on hot days. They lock in each position, so rough trails won't knock them shut.

Hard-Coated for the Long Haul

Every kit uses 1/4-inch polycarbonate with XR Optic hard coating. The polycarbonate handles impacts from rocks and branches, and the coating protects against the scratches and haze that ruin uncoated panels in dusty country.

What's in the Box

• 45" x 33" hard-coated 1/4" polycarbonate windshield with preinstalled BreezeRite vents
• Cage clamps and mounting hardware

Who It's For and What Pairs Well

For 2024+ RZR XP and XP 4 owners with an aftermarket or custom roll cage. If your machine still has the factory cage, the pre-cut full, vented and flip panels in our 2024+ RZR XP windshields will fit with no trimming. A rear windshield from the same category helps keep dust out of a closed-front cab.

Fitment

Installation Notes

Hold the panel against the cage and hood and mark the height before cutting. Make the cut with a fine-tooth blade, go slowly to avoid chipping, and leave the protective film on during cutting. Wear eye protection, gloves and a mask and follow standard shop safety when trimming. Then attach the clamps and tighten them evenly.

• Installation instructions (BBWS, PDF)