Swap the factory roll cage on a Polaris RZR XP 1000 for a custom or aftermarket cage and you find out fast that no off-the-shelf windshield fits it. This kit solves that with an oversized 1/4" polycarbonate panel that sits flush to the RZR hood and matches the width of the machine, with the top left long so you can trim it to your cage. BreezeRite vents and the XR Optic hard coating come standard. It fits the XP 1000 and XP 4 1000.
Highlights
- Oversized custom-cage panel you trim to fit your cage
- Three-position BreezeRite vents for cab airflow control
- 1/4" polycarbonate, 250x stronger than glass and 25x stronger than acrylic
- XR Optic hard coating resists scratches and UV damage
- Fits the contours of the hood
- Panel size: 2014-2018, 25" (H) x 39" (W); 2019+, 28" (H) x 40" (W)
- Comes complete with all hardware; made in the USA
A Windshield for Your Custom Build
If you've redesigned the cage to build a machine that's nothing like stock, this kit lets you keep a real windshield. The panel sits flush on the hood and matches the machine's width, a small hardware kit makes mounting easy, and the top is left for you to cut down to match the custom cage. With BreezeRite vents for comfort, your custom rig is ready for battle.
Heavy-Duty Parts
Because the windshield is custom-installed, the small parts matter. The kit includes heavy-duty clamps and a high-quality rubber bulb seal so the windshield seals properly once it's secured, giving you a moisture-free, quiet and comfortable ride.
BreezeRite Vents Give You Control
The vents have three positions: fully closed, half open and fully open. They're easy to adjust from your seat and tough enough to stay where you set them.
Hard-Coated Polycarbonate
The 1/4" polycarbonate is virtually indestructible at 250 times stronger than glass and 25 times stronger than acrylic. The XR Optic hard coating adds durability against low-hanging branches and helps the panel keep its clarity for years.
Choose Your Year
Select 2014-2018 or 2019-2023 so the bottom edge matches your hood. The 2019+ panel is taller and wider to match the later body.
What's in the Box
- Oversized 1/4" hard-coated polycarbonate windshield with BreezeRite vents
- Rubber bulb seal
- Heavy-duty clamps and hardware kit
- Installation instructions
Who It's For and What Pairs Well
This kit is for owners running an aftermarket or custom roll cage; if you're still on the factory cage, a direct-fit windshield from RZR XP 1000 windshields (4-seat: RZR XP 4 1000 windshields) is the easier route. Shopping for that new cage? See RZR XP 1000 roll cages, and add a roof from RZR XP 1000 roof tops.
Fitment
| Year | Make | Model |
|---|---|---|
| 2014-2023 | Polaris | RZR XP 1000 |
| 2014-2023 | Polaris | RZR XP 4 1000 |
Installation
Mark the panel to your cage, trim the top, then mount it with the clamps and seal. Wear protective gear and follow all safety protocols when cutting the windshield. Instructions are below.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-1000-custom-cage-windshield-kit
- fitment_raw:
- Polaris RZR XP 1000 2014-2023; Polaris RZR XP 4 1000 2014-2023
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/7967/product/67019/
- desc_status:
- rewritten_2026-10-22
