A full windshield keeps wind, rain and flying debris off you in a Polaris RZR XP 1000, but on a warm afternoon a sealed cab can get stuffy fast. This vented full windshield solves both: 1/4" polycarbonate protection all the time, plus molded BreezeRite vents you can open, crack or close from your seat. It fits the XP 1000 and XP 4 1000, works with most hard and soft tops, and is made in the USA.
Highlights
- Three-position BreezeRite vents let you control airflow
- 1/4" polycarbonate, 250x stronger than glass and 25x stronger than acrylic
- Vehicle-specific fit to the contours of the cage and hood
- Comes with all hardware and a preinstalled bulb seal
- Rattle-free fit with heavy-duty clamps
- Made in the USA
Ride in Comfort Year-Round
The windshield shields you from wind, rain and debris, and the vents let you decide how much air gets into the cab, so you can ride hard no matter the weather. When it gets hot, open the vents and let the breeze in.
BreezeRite Vents
The vents can be set fully open, half open or fully closed, all from the safety of the cab. They're sturdy and durable, so they won't move while you ride. The flip-up vent panel secures tightly to the windshield with thumb screws, so it never bounces open on rough ground.
Snug, Rattle-Free Fit
The windshield is precision cut to match the machine's curves for a snug, rattle-free fit. Heavy-duty clamps and the preinstalled bulb seal make it simple to install, so you can put it on and put it to the test in a matter of minutes.
Why Polycarbonate
No windshield material compares to polycarbonate. It's 250 times stronger than glass and 25 times stronger than acrylic, yet light enough that it won't weigh the machine down. The 1/4" panel is impact resistant and tough enough for real trail abuse. The manufacturer also offers its XR Optic hard coating, applied to both sides for scratch resistance and UV protection that keeps the panel from yellowing or spotting in sunlight. This listing is offered by year range; contact us if you want to ask about a hard-coated version.
Flip vs. Vented Full Windshields
Flip windshields give full protection when closed and open up for an open-cab feel, which is great for changing weather, but they're slightly heavier with more moving parts. A vented full windshield gives always-on protection with adjustable airflow, has fewer hinges and latches, works with wipers and washers, and stays stable at higher speeds. It doesn't offer as much maximum airflow as a flip windshield. Choose a flip for maximum versatility, or the vented full for steady protection with simple, reliable airflow control.
Quick Answers
- Is a scratch- and abrasion-resistant version made? Yes, the manufacturer's XR Optic hard coating adds scratch and UV resistance on both sides. Ask us about availability.
- Is it rattle free? Yes. The panel is precision cut to the cage and hood, the bulb seal comes preinstalled, and heavy-duty clamps hold it tight.
- Are the vents easy to open and close? Yes. The BreezeRite vents have three positions (open, half open, closed) and you can adjust them from the cab.
- Will it work with my roof? It can be used with most soft or hard tops.
Caring for a Polycarbonate Windshield
Polycarbonate lasts for years when it's cleaned the right way. Rinse off dust and grit with plenty of water before you touch the panel, then wash it with mild soap and a soft microfiber cloth. Skip paper towels, dry rags and ammonia-based glass cleaners, which can haze or scratch the surface. Taking a minute to rinse after every dusty ride is the easiest way to keep it clear, and it makes your investment go further whether or not the panel is hard coated.
Choose Your Year
Select 2014-2018 or 2019-2023. The two versions are cut for the different cage and hood shapes of those model years, so pick the one that matches your machine.
What's in the Box
- 1/4" polycarbonate vented full windshield with BreezeRite vents
- Preinstalled bulb seal
- Heavy-duty clamps and all mounting hardware
- Installation instructions
Who It's For and What Pairs Well
This is for RZR owners who ride in mixed weather and want protection without losing airflow: hunters heading out on cold mornings, trail riders who hit rain and mud, and anyone tired of eating dust and bugs at speed. Pair it with a roof from RZR XP 1000 roof tops and a rear windshield from RZR XP 1000 windshields (4-seat: RZR XP 4 1000 windshields) to cut dust coming in from behind. Clean polycarbonate with mild soap and water and a soft cloth to keep it clear.
Fitment
| Year | Make | Model |
|---|---|---|
| 2014-2023 | Polaris | RZR XP 1000 |
| 2014-2023 | Polaris | RZR XP 4 1000 |
Note: Can be used with most soft or hard tops
Installation
The windshield installs with the included clamps and bulb seal in a matter of minutes. Leave the protective film on until it is clamped in place, and snug the clamps evenly side to side so the panel sits square against the seal. Instructions are below.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-1000-vented-full-windshield
- fitment_raw:
- Polaris RZR XP 1000 2014-2023; Polaris RZR XP 4 1000 2014-2023
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/3462/product/11399/
- desc_status:
- rewritten_2026-10-22
