The 72 in Turbo S puts a lot of load through the steering, and the stock tie rods are the weak link. DRT's HD kit works with the OEM M16 rack and replaces the OEM rod ends with billet 6061-T6 tie rods. They clear every suspension and steering part through full travel, and a proprietary inner ball joint seals the factory bellow.
Features and Benefits
- Stronger and lighter than OEM: aerospace-grade 6061-T6 billet bar stock.
- Full-travel clearance: clears all suspension and steering parts through the range of motion.
- Sealed inner joint: proprietary ball joint seals the OEM bellow against water, dirt and sand.
- Chromoly rod ends: 3-piece PTFE-lined 5/8 in left/right hand with wrench notches.
- Clamping hardware: stainless misalignment spacers and Class 10.9 bolts.
- Made in the USA: mil-spec black anodize with laser branding.
Specifications, Materials and Finish
- Material: 6061-T6 billet bar stock
- Rod ends: 3-piece PTFE-lined 5/8 in chromoly, left and right hand
- Spacers: DRT-spec stainless misalignment spacers; 303 stainless rod end spacers
- Hardware: Class 10.9
- Finish: Military grade black anodize, laser engraved
- Rack: works with OEM M16 steering rack
- Platform: 72 in
- DRT part number: 20010TR03201
Fitment
| Year | Make | Model |
|---|---|---|
| 2018+ | Polaris | RZR Turbo S / Turbo S 4 (72 in, M16 rack) |
| 2018+ | Polaris | RZR Pro XP (per DRT application line) |
Fitment note: DRT's title and description are for the 2018+ Turbo S / S4 (72 in, M16 rack), but its application line also lists the Pro XP. DRT sells a separate Pro XP kit, the DRT Polaris RZR Pro XP 2020+ 64" UHD 7075 Billet Tie Rod Kit. Contact us before ordering this kit for a Pro XP.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Pair of HD billet tie rods
- PTFE-lined chromoly rod ends
- Proprietary inner ball joints
- Stainless spacers
- Class 10.9 hardware
Who It's For and What Pairs Well
For Turbo S owners in desert and dunes.
Installation Notes
Works with the OEM M16 rack and replaces the OEM rod ends. Count the turns as you remove each OEM tie rod or rod end and copy that length so the toe stays close, then get a full alignment before you drive hard. After install, confirm every jam nut is tight and set with thread locker, and paint-mark each nut so movement is easy to spot. Inspect the jam nuts before every ride. DRT's install video shows a Pro XP, but the process is the same for the Turbo S.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-polaris-rzr-turbo-s-s4-hd-billet-aluminum-tie-rod-kit-m16-rack
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 320.0; comp r1industriesoffroad.com 320.0
