Your Polaris RZR XP Turbo is built to ride all winter, even if you aren't. This Cab Heater changes that by tapping engine coolant to heat the cab just like a car heater. It mounts under the dash between the seats, where neither the driver nor the passenger bumps it, and it wires into the Turbo's own key-on and power terminals so there's no guesswork with the electrical side.
Highlights
- Mounts under the dash between the seats
- Capable of 14,600 BTU at 135 CFM
- Adjustable temperature and fan speeds
- Two vents on the unit plus two defrost vents with hoses
- 360-degree adjustable vents
- Built-in shutoff valve
- Draws 3.4 amps at 13.7 volts
- Radiator hoses rated from -40°F to 285°F
- Control box measures 10" x 4.5" x 11.75"
- Options: Quick-Start Flow Valve and Idle Flow Pump
Turbo-Specific Mounting
The kit includes Turbo-specific mounting plates, hoses and even the drill bits you need, so you aren't hunting for parts halfway through the job. Power comes from the factory key-on and power terminals, which keeps the wiring short and neat and means the heater shuts off with the machine.
Defrost That Looks Factory
Along with the two vents on the heater, two defrost vents route up through the dash and aim warm air at the windshield. They look like they came from the factory and keep snow, ice and fog off the glass while you drive.
Comfort in Any Weather
Turn the temperature and fan speed up on a frozen morning or down to a gentle warmth on a cool fall evening. The hoses handle anything from -40°F outside to a 285°F engine, so the system holds up through the whole season.
Get Heat Faster
- Quick-Start Flow Valve: sends all engine coolant to the heater core while the engine is cold, cutting warm-up time in half, then opens automatically to feed the radiator so the engine won't overheat.
- Idle Flow Pump: keeps coolant moving when you're slow or idling, so the heater blows hot air in about 30 seconds.
Fitment Notes
- Fits 2016-2021 RZR XP Turbo and XP 4 Turbo; pick your year range at checkout
- Not compatible with machines that have a speaker under the glove box
What's in the Box
- Heater unit with fan and temperature controls
- Defrost vents and hoses
- Turbo-specific mounting plates, radiator hoses, drill bits and hardware
- Flow valve and/or idle pump, if selected
Who It's For and What Pairs Well
A good fit for riders who want strong cab heat at a lower price than an in-dash unit and don't mind a heater under the dash. Seal the cab to get the most from it with RZR XP Turbo doors, front and rear windshields and a top from RZR XP Turbo roof tops.
Fitment
| Year | Make | Model |
|---|---|---|
| 2016-2021 | Polaris | RZR XP Turbo |
| 2016-2021 | Polaris | RZR XP 4 Turbo |
Note: Not compatible with machine with a speaker under the glove box.
Installation Notes
Mount the plates and heater, drill the dash for the defrost vents, connect the coolant hoses and wire to the key-on terminal. Bleed the cooling system and check for leaks before riding.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-turbo-cab-heater
- fitment_raw:
- Polaris RZR XP Turbo 2016-2021; Polaris RZR XP 4 Turbo 2016-2021
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/3393/product/15668/
- desc_status:
- rewritten_2026-10-25
