The 2024-up RZR XP 1000 brought a new chassis, so it needs its own plow mount, and that is what this kit is built around. You get the Denali MA11702 mount plate for the 2024-2025 RZR XP 1000, Denali pushtubes and your pick of blade, all in one order. It turns the RZR into a winter driveway machine without permanent changes to the car.
Made for the New RZR XP Chassis
- Mount plate specific to the 2024-2025 RZR XP 1000 frame, not a carry-over from older RZRs.
- Laser-cut 1/4 in. steel, welded, and designed to stay on for summer riding.
- A 60 or 66 in. blade keeps things nimble on narrow paths; 72 in. clears wider drives in fewer passes.
- Quick pin detachment so the plow is off before the spring trail season.
- Centered mounting keeps impact loads off the front A-arms.
Choosing Your Blade
- Straight HD blade (60, 66 or 72 in., black): one-piece 11-gauge steel face with a 19 in. scoop. Kit adds $0 / $50 / $100 as you go wider.
- PRO curved blade (66 or 72 in., black, red or yellow): one-piece 12-gauge steel with tapered ends that throw snow off to the side like a DOT truck plow. PRO kits add a rubber snow flap and plow marker flags.
- Rule of thumb: pick a blade at least as wide as your machine is track-to-track, so you are not driving over the edge of every pass.
Plowing Tips for the RZR XP
- Pick the narrower blade if you mostly clear sidewalks and paths; the 72 in. blade is best for open driveways.
- Push in shorter bites when the snow is heavy and wet so the RZR keeps traction.
- Raise the blade fully for transport so it clears curbs and approaches.
Denali Plow Specifications
- Blade scoop: 19 in. with a 65-degree attack angle and over-center design so snow rolls up and is thrown forward
- Four full-height 7-gauge ribs plus three 7-gauge horizontal stabilizers at the deepest point of the blade
- Replaceable 7-gauge steel wear bar and height/angle adjustable skid feet
- Pushtubes: impact-resistant reinforced pivot with two extra support bars and a structural tube steel cross bar
- Manual angle: 0, 12.5 or 25 degrees left or right; 13.5 in. center-to-center plow mount tabs
- Mount plate: laser-cut 1/4 in. steel, fully welded, with slotted holes that let the blade follow the ground
- Winch required to raise and lower the blade (not included)
Fitment
| Year | Make | Model |
|---|---|---|
| 2024-2025 | Polaris | RZR XP 1000 |
Note: Moto Alliance lists this mount for 2024-2025 RZR XP 1000 only. 2026 fitment is not listed.
What's in the Box
- Denali mount plate MA11702 with mounting hardware
- Denali UTV pushtubes with quick-release pins (pins included)
- Your choice of Denali blade
- 7-gauge steel wear bar
- Adjustable skid feet
- PRO curved blade kits only: rubber snow flap and plow marker flags
- Installation hardware and instructions
Who It's For and What Pairs Well
This kit is for 2024-up RZR XP owners who want to keep riding in winter and clear the driveway on the way out. Add a RZR XP 1000 2024-2027 windshield and a Firestorm heater from RZR XP 1000 2024-2027 interior accessories for a comfortable winter cab.
Installation Notes
Bolt the MA11702 mount to the RZR frame following the PDF, using the supplied hardware. A winch is required for blade lift and is not included. Recheck fasteners after your first plowing session.
- source:
- motoalliance
- ma_url:
- https://www.motoalliance.com/DENALI-PLOWS-Mount-Plate-for-2024-2025-Polaris-RZR-XP1000
- desc_status:
- written_2026-10-27
- ma_parts:
- MA11702 $149.99 + PTUT $300 + blade $320-$500 (BLST60UTV,BL66STBK,BL72STBK,BLPro66/72 BK/RE/YE)
