The tie rod ends take a beating every time a front tire on your Polaris RZR XP 1000 smacks a rock or drops into a rut, and a failed end means no steering at all. This replacement kit rebuilds heavy-duty tie rods with 4130 chromoly ends that are bigger and tougher than OEM, using a monoball bearing pressed into the housing and locked with a circlip. It's made for the 15-15/16" heavy-duty tie rod bars, not for stock tie rods.
Highlights
- 4130 chromoly with a heavy-duty design
- Monoball bearing pressed into the housing and secured with a circlip
- Precision blend of materials and heat treatment
- M14x1.5 LH threads
- Works with 15-15/16" heavy-duty tie rod bars: stock width, long travel and Z-Bend
Built Stronger Than the Factory End
The strength and integrity of a tie rod end is nothing to skimp on. These ends were engineered to perform better, last longer and work harder than the OEM tie rod end. Each one has increased size, improved function, and an exceptional blend of materials and heat treatment, so it holds up to big tires and hard hits that wear out stock ends.
Measure Before You Order
This replacement kit will not work with stock tie rods. It only works with the heavy-duty tie rods that use 15-15/16" rod bars. Earlier tie rod bars were designed to use a factory tie rod end, which is a different length. Measure your bar first: if it isn't 15-15/16", you'll need a complete heavy-duty tie rod assembly to use these ends.
Choose Your Year
Pick 2014 or 2015-2023 so you get the right end for your machine.
What's in the Box
- Heavy-duty 4130 chromoly tie rod end replacement kit
- Installation instructions
Who It's For and What Pairs Well
This kit is for owners already running heavy-duty tie rods with 15-15/16" bars who need fresh ends. If you're still on stock tie rods, start with a complete heavy-duty or billet tie rod kit from RZR XP 1000 steering parts (4-seat: RZR XP 4 1000 steering parts). New ball joints and A-arm bushings from RZR XP 1000 suspension parts finish off a front-end refresh.
Fitment
| Year | Make | Model |
|---|---|---|
| 2014-2023 | Polaris | RZR XP 1000 |
| 2014-2023 | Polaris | RZR XP 4 1000 |
Installation
Remove the worn end from the tie rod bar, thread in the new end, and set your toe. Instructions for the tie rod ends and the matching tie rod kit are below.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-1000-heavy-duty-tie-rod-end-replacement-kits-1
- fitment_raw:
- Polaris RZR XP 1000 2014-2023; Polaris RZR XP 4 1000 2014-2023
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/2118/product/6093/
- desc_status:
- rewritten_2026-10-22
